Grand Marquis V8-4.6L Flex Fuel (2010)
10. Install the side air bag.
-
Install the side air bag module onto the front seat backrest frame mounting bracket.
-
The deployment chute should not have any wrinkles or folds where it contacts the seat back frame mounting bracket.
-
Install the 2 side air bag module nuts (new nuts, if required).
-
Tighten to 7 Nm (62 lb-in).
11. Reposition the backrest foam pad and trim cover to the backrest frame.
12. NOTE: The backrest frame and side air bag module have been removed from view for clarity.
Make sure the deflector flap lays flat between the backrest trim cover and backrest foam pad.
13. Install the head restraint.
14. Install the front seat backrest. For additional information, refer to Seat Backrest - Front See: Removal and Replacement/Seat Backrest - Front.
15. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering in the General
Procedures portion of Restraint Systems.
