Grand Marquis V8-4.6L Flex Fuel (2010)
Parking Brake Control: Service and Repair
Parking Brake Control
Removal and Installation
NOTE: Column shift shown, floor shift similar.
1. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in
Vehicle Jacking and Lifting. Failure to follow the instructions may result in serious personal injury.
With the vehicle in NEUTRAL, position it on a hoist. For additional information refer to Vehicle Jacking and Lifting.
2. Using the parking brake release handle, release the parking brake control.
3. Pull the parking brake adjuster clip downward.
4. Apply the parking brake control fully.
5. Push upward on the parking brake adjuster clip to lock the adjuster.
