Grand Marquis V8-4.6L Flex Fuel (2010)
Radiator Cooling Fan Motor: Description and Operation
ENGINE CONTROL COMPONENTS
Fan Control
The PCM monitors certain parameters (such as engine coolant temperature, vehicle speed, A/C on/off status, A/C pressure) to determine engine
cooling fan needs.
For variable speed electric fan(s):
The PCM controls the fan speed and operation using a duty cycle output on the fan control variable (FCV) circuit. The fan controller (located at or
integral to the engine cooling fan assembly) receives the FCV command and operates the cooling fan at the speed requested (by varying the power
applied to the fan motor).
EDGE/MKX, FLEX, MKS, MKT, TAURUS, FUSION/MILAN/MKZ, CROWN VICTORIA/GRAND MARQUIS, TOWN CAR: FCV DUTY
CYCLE OUTPUT FROM PCM (negative duty cycle)
For relay controlled fans:
The PCM controls the fan operation through the fan control (FC), (single speed fan applications), low fan control (LFC) and high fan control (HFC)
outputs. Some applications have the xFC circuit wired to 2 separate relays.
For 2-speed fans, although the PCM output circuits are called low and high fan control, cooling fan speed is controlled by a combination of these
outputs. Refer to the following tables.
2.0L Focus And Transit Connect (With A/C): PCM FC Output State For Cooling Fan Speeds
2.5L Escape: PCM FC Output State For Cooling Fan Speeds
