mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Headlamp Bulb|Service and Repair|Page 6654 > < Diagram Information and Instructions|Page 6649
Page 1
background image

Headlamp Bulb: Service and Repair

Headlamp Bulb

Crown Victoria

Grand Marquis

Removal and Installation

WARNING: The bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the
bulb only by its base. Avoid touching the glass envelope. Failure to follow these instructions may result in personal injury.

NOTE:  The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended
period of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn
the headlamps on with the bulb removed.

NOTE:  Bulbs 9004 and 9007 look similar, but are not interchangeable.

All vehicles

1. Remove the headlamp assembly. For additional information, refer to Headlamp Assembly  See: Service and Repair.

Crown Victoria

2. Rotate the headlamp bulb retainer counterclockwise and remove the retainer.

3. Grasp the headlamp bulb by its base and remove the bulb.

Grand Marquis

Headlamp Bulb|Service and Repair|Page 6654 > < Diagram Information and Instructions|Page 6649