mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Vehicle Speed Sensor > < Transmission Position Switch/Sensor, A/T|Locations|Page 2637
Page 3
background image

4. With the manual lever in the (D) position, connect the selector lever cable.

-

Tighten to 30 Nm (22 lb-ft).

5. Connect the TR sensor electrical connector.

6. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and

procedures, refer to Vehicle Jacking and Lifting. Failure to follow these instructions may result in serious personal injury.

If equipped with fire a suppression system, repower the system.

Vehicle Speed Sensor > < Transmission Position Switch/Sensor, A/T|Locations|Page 2637