Grand Marquis V8-4.6L Flex Fuel (2010)
Seat Heater Control Module: Service and Repair
Heated Seat Module
Heated Seat Module
Removal and Installation
1. Remove the affected seat. For additional information, refer to Seat - Front See: Body and Frame/Seats/Service and Repair/Seat - Front.
2. Disconnect the electrical connector.
3. Remove the heated seat module.
-
Insert a flat-blade screwdriver into the heated seat module bracket and release the locking tab.
-
For installation, make sure the locking tab is correctly seated.
4. To install, reverse the removal procedure.
