Grand Marquis V8-4.6L Flex Fuel (2010)
6. NOTE: The RCM has been removed for clarity.
Connect the large RCM electrical connector.
-
Using the connector position assurance lever, pivot it toward the RCM, drawing the connector into the RCM.
-
Make sure the thumb tab is engaged to the retainer on the RCM and is locked in place.
Vehicles with column shifter
7. Position the ashtray bracket, slide the retaining clips into place and install the 2 screws.
8. Install the ashtray.
Vehicles with floor shifter
9. Connect the storage compartment power point electrical connector.
10. Align the retaining clips and install the storage compartment.
11. Align the retaining clips and install the floor console finish panel.
12. Place the transmission in PARK and release the parking brake.
All vehicles
13. Position the carpet patch and install the pin-type retainer.
14. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint
System (SRS) Depowering and Repowering in the General Procedures portion.
