Grand Marquis V8-4.6L Flex Fuel (2010)
All vehicles
1. Depower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint
System (SRS) Depowering and Repowering in the General Procedures portion.
Vehicles with power seats
2. Disconnect the seat position sensor electrical connector.
3. Remove the seat position sensor bolt.
-
To install, tighten to 9 Nm (80 lb-in).
4. Remove the seat position sensor.
-
Press the sensor tab inward to release and remove the seat position sensor.
5. Remove the magnet assembly bolt.
-
To install, tighten to 9 Nm (80 lb-in).
6. Remove the magnet assembly.
-
Slide the magnet assembly rearward to release the front tab to remove the magnet assembly.
Vehicles with manual seats
7. Disconnect the seat position sensor electrical connector.
8. Remove the bolt and the seat position sensor.
-
To install, tighten to 9 Nm (80 lb-in).
All vehicles
9. To install, reverse the removal procedure.
10. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint
System (SRS) Depowering and Repowering in the General Procedures portion.
