Grand Marquis V8-4.6L Flex Fuel (2010)
Wiper Switch: Service and Repair
Steering Column Multifunction Switch
NOTE: Steering wheel removed for clarity.
Removal and Installation
1. Remove the steering column tilt release lever/handle.
2. NOTE: Release the upper steering column shroud by pressing the sides inward.
Remove the 3 screws and the upper and lower steering column shrouds.
-
To install, tighten to 2 Nm (18 lb-in).
3. Disconnect the 3 multifunction switch electrical connectors.
4. Remove the 2 screws and the multifunction switch.
-
To install, tighten to 3 Nm (27 lb-in).
5. To install, reverse the removal procedure.
