Grand Marquis V8-4.6L Flex Fuel (2010)
NOTICE: Care must be taken when connecting the passenger air bag module electrical connectors to prevent damage to the electrical
connector terminals and the passenger air bag module pins.
NOTICE: Carefully align the locking inserts to the electrical connectors or damage may result.
Align and connect the passenger air bag module jumper harness electrical connectors to the passenger air bag module and install the locking
inserts.
10. Make sure the J-nuts on the passenger air bag module are fully seated into the slots.
11. NOTICE: Do not handle the passenger air bag module by grabbing the edges of the deployment doors. Damage to the air bag module
may occur.
Install the passenger air bag module into the instrument panel.
1. Position the passenger air bag module into the instrument panel.
2. Install the 2 bolts.
-
Tighten to 3 Nm (27 lb-in).
12. Through the glove compartment opening, install the 2 passenger air bag module bolts.
-
Tighten to 9 Nm (80 lb-in).
13. Connect the passenger air bag module electrical connector and attach the pin-type retainer to the bracket.
14. Install the RH instrument panel trim panel.