mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Caliper Removal and Installation, Front|Page 5961 > < Caliper Removal and Installation, Front|Page 5959
Page 1
background image

Brake Caliper: Service and Repair
Brake Caliper Anchor Plate, Rear

Brake Caliper Anchor Plate 

Removal and Installation 

Disc Brake System - Exploded View

1. WARNING:  The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension

vehicle. This can be accomplished by turning off the air suspension service switch. Failure to do so can result in unexpected inflation or
deflation of the air springs, which can result in shifting of the vehicle during these operations. Failure to follow these instructions may
result in personal injury.
 

If equipped, turn the air suspension service switch to the OFF position.

2. WARNING:  If equipped with fire suppression system, depower the system. For important safety warnings and procedures, refer to Fire

Suppression System. 

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.

3. Disconnect the rear parking brake cable and conduit.
4. Remove the axle shaft.

Caliper Removal and Installation, Front|Page 5961 > < Caliper Removal and Installation, Front|Page 5959