Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
Machine the brake disc.
6
Remove the lathe and, if installed, the silencer belt.
7
Remove the hub adapter.
8. Remove the metal shavings.
9. Remove the brake disc from the hub.
10. Remove metal shavings from the hub, the brake disc mounting surfaces and from the anti-lock brake system (ABS) sensors.
11. Apply anti-seize lubricant to the hub mounting surface to prevent corrosion.
12. Align the match marks and install the brake disc on the hub.
13. NOTE: It is not required to install new brake pads if friction material properties are within guidelines.
Install the brake caliper and brake caliper anchor bracket.
14. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire
Suppression System.
If equipped with fire suppression system, repower the system.
