Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
4. Have an assistant hold firm pressure on the brake pedal.
5. Loosen the bleeder screw until a stream of brake fluid comes out. While the assistant maintains pressure on the brake pedal, tighten the bleeder
screw and release the pedal pressure.
^
Release the brake pedal.
^
Repeat 3 times or until clear, bubble-free fluid comes out.
^
Refill the brake master cylinder reservoir as necessary.
6. Tighten the bleeder screw to 21 Nm (15 ft. lbs.).
7. Repeat Steps 3 through 6 for the remaining bleeder screws in the system.
8. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire
Suppression System.
If equipped with fire suppression system, repower the system.
