mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Brake Fluid Level Sensor/Switch > < Brake Fluid|Specifications
Page 1
background image

Brake Fluid: Description and Operation

Brake Fluid 

WARNING:  Use of any other than approved DOT 3 brake fluid will cause permanent damage to brake components and will render the
brakes inoperative.
 

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
 

CAUTION:  Brake fluid is harmful to painted or plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.

Use clean, Ford High Performance DOT 3 Motor Vehicle Brake Fluid PM-1 (Canada CPM-1) or equivalent meeting Ford specification
ESA-M6C25A.
^

Do not reuse brake fluid drained or bled from the system.

^

Do not use brake fluid that has been stored in an open container.

^

Do not use contaminated brake fluid.

Brake Fluid Level Sensor/Switch > < Brake Fluid|Specifications