Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
5. Tighten the bolts in the sequence shown.
^
Tighten to 10 Nm (89 inch lbs.).
6. Install the camshaft sprocket and bolt. Tighten the bolt in 2 stages.
^
Stage 1: Tighten to 40 Nm (30 ft. lbs.).
^
Stage 2: Tighten an additional 90 degrees (1/4 turn).
7. Install the timing chains.
8. Install the roller followers.
9. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire
Suppression System.
If equipped with fire suppression system, repower the system.
