Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
Rocker Arm Assembly: Service and Repair
Camshaft Roller Follower
Camshaft Roller Follower
Special Tool(s)
Removal
1. WARNING: If equipped with fire suppression system, depower the system. For important safety warnings and procedures, refer to Fire
Suppression System.
With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the valve covers.
3. Position the piston of the cylinder being repaired at the bottom of the stroke.
4. Install the special tool between the valve spring coils to prevent valve stem seal damage.
5. Use the special tool to compress the valve springs and remove the cam roller followers.
Installation
