mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Sensors and Switches - Instrument Panel > < Seat Belt Reminder Buzzer|Description and Operation
Page 1
background image

Seat Belt Reminder Lamp: Description and Operation

Safety Belt Warning System

The safety belt warning indicator illuminates and a chime sounds to remind the occupants to fasten their safety belts.

The conditions of operation for the safety belt warning indicator and chime are as follows:
-

If the driver safety belt is not buckled before the ignition switch is turned to RUN, the safety belt warning indicator illuminates for 1-2 minutes
and the warning chime sounds for 4-8 seconds.

-

If the driver safety belt is buckled while the warning indicator is illuminated and the reminder chime is sounding, the safety belt warning indicator
and reminder chime will turn off.

-

If the driver's safety belt is buckled before the ignition switch is turned to the ON position, the safety belt warning indicator and reminder chime
will remain off.

Belt Minder

The Belt Minder feature is a supplemental warning to the safety belt warning function. This feature provides an additional reminder that the driver or
passenger safety belt is unbuckled by intermittently sounding a chime and illuminating the safety belt warning lamp in the instrument cluster.

The passenger seat belt minder feature is activated only when the occupant classification sensor (OCS) system detects a passenger in the right front
seat and the passenger's weight exceeds a programmed limit.

To activate or deactivate the Belt Minder feature, refer to Seat Belt Systems.

Sensors and Switches - Instrument Panel > < Seat Belt Reminder Buzzer|Description and Operation