mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 2262 > < Air Bag Disarming and Arming|Page 2260
Page 8
background image

18. Remove the trim panel.

1. Disconnect the rear window defrost switch electrical connector.
2. If equipped, disconnect the clock electrical connector.
3. Disconnect the passenger air bag deactivation (PAD) indicator.
4. Remove the trim panel.

19. Open the glove compartment. Disconnect the glove compartment isolator.

20. While pushing in on the 2 glove compartment door tabs, position the glove compartment downward.

21. Looking up into the front center of the glove compartment opening, separate the passenger air bag module electrical connector and pin-type

retainer from the bracket. Disconnect the passenger air bag module electrical connector.

Air Bag Disarming and Arming|Page 2262 > < Air Bag Disarming and Arming|Page 2260