mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Fluid Filter - A/T|Service and Repair|Page 2140 > < Evaporative Canister Filter|Service and Repair|Page 2136
Page 1
background image

Fluid Filter - A/T: Service and Repair

Fluid Pan, Gasket and Filter

Material

Removal

CAUTION:  Do not use any supplemental transmission fluid additives or cleaning agents. The use of these products could cause internal transmission
components to fail; this will affect the operation of the transmission.

Use of a fluid other than specified could result in transmission failure.

NOTE:  Normal maintenance requires periodic automatic transmission fluid changes. If a major repair, such as a clutch, band, bearing, etc., is
required, the automatic transmission must be removed for repair.

1. WARNING:  If equipped with tire suppression system, depower the system. For important safety warnings and procedures, refer to Fire

Suppression System.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.

2. Drain the transmission fluid.

^

Loosen the transmission fluid pan bolts and allow the fluid to drain. After the fluid has drained remove the bolts.

3. Remove the transmission fluid pan and transmission fluid pan gasket.

Fluid Filter - A/T|Service and Repair|Page 2140 > < Evaporative Canister Filter|Service and Repair|Page 2136