Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
Body Control Module: Service and Repair
Lighting Control Module (LCM)
LIGHTING CONTROL MODULE (LCM)
Removal and Installation
1. CAUTION: Prior to removal of the module, it is necessary to upload module configuration information to a diagnostic tool. This
information needs to be downloaded into the new module once installed.
Disconnect the battery.
2. Remove the pin-type retainers and position the LH instrument panel lower insulator aside.
3. Disconnect the courtesy lamp and remove the LH instrument panel lower insulator.
4. Remove the accelerator pedal and shaft.
5. Remove the 2 screws and position the LCM aside.
