Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
4. Disconnect the 4 fuel vapor control tube assembly valve retainer clips from the fuel tank.
5. Remove and discard the clamp.
-
Install a new crimp style clamp upon installation.
6. Remove the vapor control tube assembly valve from the fuel tank.
7. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire
Suppression System.
NOTE: Lubricate all O-ring seals with P80 Rubber Lubricant Emulsion or equivalent meeting Ford specification WSE-M99C45-A2.
To install, reverse the removal procedure. If equipped with fire suppression system, repower the system.
-
Leak test the system. See: Testing and Inspection/Evaporative Emission System Leak Test
-
Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Evaporative Emission Repair Verification
Drive Cycle
