mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Spring Lock Couplings|Page 3995 > < Fuel Injector 1|Page 3990
Page 1
background image

Fuel Line Coupler: Service and Repair
Spring Lock Couplings

SPRING LOCK COUPLINGS

Special Tool(s)

Special Tool(s)

Disconnect and Connect

WARNING:

-

Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly flammable
mixtures are always present and may be ignited, resulting in possible personal injury.

-

Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any
fuel-related components. Highly flammable mixtures are present and may be ignited. Failure to follow these instructions can result in
personal injury.

-

Fuel in the fuel system remains under high pressure even when the engine is not running. Before servicing or disconnecting any of the fuel
lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal injury
or a fire hazard.

1. Release the fuel system pressure.

2. Remove the fuel tube clip.

3. Install the disconnect tool.

Spring Lock Couplings|Page 3995 > < Fuel Injector 1|Page 3990