Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
Seat Belt: Service and Repair
Safety Belt Maintenance
SAFETY BELT MAINTENANCE
WARNING: All safety belt assemblies (including retractors, belt tension sensor [BTS], if equipped, buckles, shoulder belt height adjusters [if
equipped], child safety seat tether attachments and attaching hardware) should be inspected after every collision. All new belt assemblies
should be installed unless a qualified technician finds the assemblies show no damage and operate correctly. Belt assemblies not in use during a
collision should also be inspected and new assemblies installed if either damage or incorrect operation is noted. Failure to follow these
instructions could increase the risk of personal injury in collisions.
1. The safety belt assemblies should be periodically inspected to make sure that they have not become damaged and that they remain in correct
operating condition, particularly if they have been subjected to severe stress.
2. Before installing the new safety belt assembly, the safety belt retaining areas must be inspected for damage and distortion. If the retaining points
are damaged and distorted, the sheet metal must be reworked back to its original shape and structural integrity.
3. Install the new safety belt(s) using the appropriate instructions. Carry out the Functional Test Procedure. See: Testing and Inspection/Component
Tests and General Diagnostics
