Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
-
Press the sensor tab inward to release and remove the seat position sensor.
7. Remove the magnet assembly bolt.
-
To install, tighten to 9 Nm (80 lb-in).
8. Remove the magnet assembly.
-
Slide the magnet assembly REARWARD to release the front tab to remove the magnet assembly.
Vehicles with manual seats
9. Disconnect the seat position sensor electrical connector.
10. Remove the bolt and the seat position sensor.
-
To install, tighten to 9 Nm (80 lb-in).
All vehicles
11. To install, reverse the removal procedure.
12. Repower the system.
