Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
Engine Temperature Sensor: Service and Repair
Removal and Installation
1. Disconnect the battery ground cable.
2. Rotate the tensioner clockwise and remove the accessory drive belt from the generator pulley.
3. Loosen the 2 lower generator bolts.
-
To install, tighten to 25 Nm (18 lb-ft).
4. Remove the 2 generator bracket bolts and position the generator and bracket aside.
-
To install, tighten to 10 Nm (89 lb-in).
