Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
2. Remove the pushpins and the radiator cover shield.
3. Remove the battery and battery tray. For additional information, refer to Battery.
4. Remove the cooling module bracket bolts.
^
To install, tighten to 10 Nm (89 inch lbs.).
-
Slide mounting brackets OFF the cooling module.
5. CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the
power steering components can result.
Release the clamps and disconnect the power steering inlet and outlet hoses from the oil cooler.
^
Clamp off hoses to prevent excess fluid loss.
6. Remove the 2 upper pushpins on both sides of the radiator side shields.
7. Remove the power steering cooler-to-radiator module pushpin.
8. Position the radiator rearward.
^
Slide the cooler up and out from the clips and remove cooler from radiator module.
9. To install, reverse the removal procedure.
10. Fill and check the system for leaks.
11. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire
Suppression System.
If equipped with fire suppression system, repower the system.
