Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
Suppression System.
With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
4. CAUTION: Do not apply pressure on the power steering pump rotor shaft. Pressure will damage internal thrust areas of the power steering pump.
Installation of a new power steering pump pulley is necessary after being removed and installed 2 times.
Using the special tool, remove the pulley.
5. To install, reverse the removal procedure.
^
Use the special tool to install the pulley.
6. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire
Suppression System.
If equipped with fire suppression system, repower the system.
7. Turn the air suspension service switch to the ON position.
