mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 6690 > < Air Bag Disarming and Arming|Page 6688
Page 15
background image

All vehicles

1. Remove the RCM fuse 22 (10A) from the CJB.
2. Disconnect the battery ground cable and wait at least one minute.

Vehicles with side airbags

3. Remove the restraint system diagnostic tool from the driver seat side air bag electrical connector.

4. Connect the driver seat side air bag module electrical connector, located at the lower rear of the seat cushion pan.

5. Remove the restraint system diagnostic tool from the passenger seat side air bag electrical connector.

Air Bag Disarming and Arming|Page 6690 > < Air Bag Disarming and Arming|Page 6688