Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
Suspension Control Module: Service and Repair
Air Suspension Module
Removal and Installation
WARNING: Before carrying out maintenance on any air suspension components, disconnect the power to the system by turning off the air
suspension switch located on the LH side of the luggage compartment to prevent vehicle damage. Failure to follow these instructions may
result in personal injury.
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage can result.
CAUTION: Suspension fasteners are critical parts because they effect performance of vital components and systems and their failure can result in
major service expense. A new part with the same part number or an equivalent part must be installed, if installation is necessary. Do not use a part of
lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.
1. Turn the air suspension service switch to the OFF position.
2. Disconnect the battery ground cable. For additional information, refer to Battery.
