Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
5. Position the shock and spring compressor onto the strut.
6. Position the mounting bracket and dust boot onto the spring. Make sure the marks made during disassembly, Step 3, are lined up.
7. Install a new shock rod nut.
^
To install, tighten to 50 Nm (37 ft. lbs.)
8. Remove the spring compressor.
9. Install the shock absorber and spring assembly.
10. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire
Suppression System.
If equipped with fire suppression system, repower the system.
