mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Brake Shift Interlock Actuator - Column Shifter|Page 4609 > < Diagram Information and Instructions|Page 4604
Page 1
background image

Shift Interlock Solenoid: Service and Repair
Brake Shift Interlock Actuator - Column Shifter

Brake Shift Interlock Actuator - Column Shifter

Removal and Installation

1. WARNING:  To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing

or replacing any front or side air bag supplemental restraint system (SRS) components and before servicing, replacing, adjusting or
striking components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood
latches.

Please refer to Air Bag Systems to determine location of the front air bag sensors.

The side air bag sensors are located at or near the base of the B-pillar.

To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect

Brake Shift Interlock Actuator - Column Shifter|Page 4609 > < Diagram Information and Instructions|Page 4604