mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Seals and Gaskets, A/T|Service and Repair|Page 4851 > < Seals and Gaskets, A/T|Service and Repair
Page 2
background image

Removal

1. WARNING:  If equipped with fire suppression system, depower the system. For important safety warnings and procedures, refer to Fire

Suppression System.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.

2. NOTE:  The output shaft and driveshaft are a balanced assembly.

Mark the driveshaft flange and the rear pinion flange for correct alignment during assembly.

Seals and Gaskets, A/T|Service and Repair|Page 4851 > < Seals and Gaskets, A/T|Service and Repair