Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
11. Remove the manual control lever nut and slide the manual control lever shaft out of the case.
12. CAUTION: Use care not to damage the manual control lever shaft bore or the new seal may leak due to damage to the bore.
Remove the manual control lever shaft seal.
Installation
1. Using the special tool, install the manual control lever shaft seal.
2. Install the manual control lever shaft.
1
Install the manual control lever shaft.
2
Install the manual control lever nut.
^
Tighten to 32 Nm (24 ft. lbs.).
3
Install the manual control lever shaft retaining pin.