mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Selector Lever - Column Shifter|Page 5069 > < Selector Lever - Column Shifter
Page 2
background image

To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary
batteries and power supplies (if equipped).

Disconnect the battery ground cable. Wait at least one minute before proceeding with the procedure to allow the backup power supply to deplete
its energy. For additional information, refer to Battery.

2. Remove the lower steering column opening finish panel.

1

Remove the screw and position the parking brake release handle aside.

2

Remove the screw from the lower steering column opening finish panel.

3

Pull outward to release the retaining clips and remove the lower steering column opening finish panel.

3. Remove the 5 screws and the lower steering column opening finish panel reinforcement.

4. Remove the lower steering column shroud.

1

Remove the 3 screws.

2

Remove the lower steering column shroud.

Selector Lever - Column Shifter|Page 5069 > < Selector Lever - Column Shifter