mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Selector Lever - Column Shifter|Page 5070 > < Selector Lever - Column Shifter|Page 5068
Page 3
background image

5. Remove the upper steering column shroud.

6. Disconnect the transmission control (TC) switch harness connector.

7. Separate the TC switch harness from the locators and the gearshift lever cover from the steering column.

8. CAUTION:  Never reinstall the old gearshift lever pin.

Remove the gearshift lever pin and the gearshift lever. Discard the gearshift lever pin.

9. To install, reverse the removal procedure.

Selector Lever - Column Shifter|Page 5070 > < Selector Lever - Column Shifter|Page 5068