mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Selector Lever - Column Shifter|Page 5072 > < Selector Lever - Column Shifter|Page 5070
Page 2
background image

The side air bag sensors are located at or near the base of the B-pillar.

To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary
batteries and power supplies (if equipped).

Disconnect the battery ground cable. Wait at least one minute before proceeding with the procedure to allow the backup power supply to deplete
its energy. For additional information, refer to Battery.

2. Remove the instrument panel finish panel and disconnect the electrical connector.

3. Lift the console finish panel and remove.

4. Push shift handle bezel down and disconnect TC switch harness.

5. Remove the 2 shift handle retaining screws and remove the shift handle.

Selector Lever - Column Shifter|Page 5072 > < Selector Lever - Column Shifter|Page 5070