Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
2. NOTE: The main control valve body bolts will be tightened in later steps.
Loosely install the 11 long main control valve body bolts.
3. NOTE: Lubricate the electronic pressure control (EPC) solenoid O-rings with clean automatic transmission fluid.
Position the EPC solenoid bracket and loosely install the bolt.
4. The main control valve body bolts will be tightened in later steps.
^
Loosely install the 12 short main control valve body bolts.
5. Install the manual control valve detent lever spring and loosely install the bolt.
