Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
3. Install heat shrink tubing.
4. Twist wires together.
5. Solder wires together.
NOTE: Use Rosin Core Mildly-Activated (RMA) solder. Do not use acid core solder.
6. Bend Wire 1 back in a straight line.
NOTE: Wait for solder to cool before moving wires.
7. Evenly position heat shrink tubing over wire repair.
NOTE: Overlap tubing on both wires.
8. Use heat gun to heat the repaired area until adhesive flows out of both ends of heat shrink tubing.
9. Reconnect battery ground cable.
Recommended splicing method - Crimp (For 10-22 AWG Diameter Wire to Like Wire Diameter)
