Grand Marquis V8-4.6L VIN V Flex Fuel (2006)
Rear Door Window Glass: Service and Repair
Rear Door Window Glass
REAR DOOR WINDOW GLASS
Special Tool(s)
Special Tool(s)
Removal and Installation
1. Remove the rear door trim panel.
2. Position the watershields aside.
3. Remove the 3 rivets and position the rear door latch remote control aside.
4. Remove the inner belt line moulding.
5. Remove the nut and outer belt line moulding.
-
To install, tighten to 12 Nm (9 lb-ft).
6. Remove the rear door glass top run inner bolt.
-
To install, tighten to 10 Nm (89 lb-in).
7. Connect the window control switch electrical connectors.
8. Connect the battery.
9. Lower the rear door window glass to gain access to the rivets.
10. CAUTION: Do not attempt to forcibly remove the rivets as damage to the rear door window glass may result. Prior to removing the rivet
center pins, it is necessary to place a suitable block support between the door outer panel and the rear door window channel bracket to
stabilize the rear door window glass during rivet removal.
Remove the 2 rear door window regulator rivets.
