mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Customer Interest for Vacuum Brake Booster: > < Hydraulic Brake Booster|Testing and Inspection|Page 3425
Page 1
background image

Vacuum Brake Booster: All Technical Service Bulletins
Brake Booster - Vacuum Hose Routing

Article No. 83-6-5

BRAKE - BOOSTER - REPLACEMENT

FORD 1981-82-83 ESCORT, EXP

LINCOLN-MERCURY 1981-82-83 LYNX, LN7

FIGURE 10

When replacing the brake booster on the subject vehicles the vacuum supply hose must be routed as shown in the 1983 shop manual, page 12-50-3, and
Figure 10, below.
The difference between 1983 and previous hose routing is that the 83 hose is looped under the master cylinder while the previous routing is direct from
the tee to the check valve at a downward angle. All future service should include looping the hose under the master cylinder. This new routing allows the
hose to act as a moisture trap and will help prevent moisture entry into the booster.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"
SPECIAL INSTRUCTIONS: Cut the hose from bulk stock approximately 20 inches long.

Customer Interest for Vacuum Brake Booster: > < Hydraulic Brake Booster|Testing and Inspection|Page 3425