LN7 L4-098 1.6L VIN 4 2-bbl (1982)
Technical Service Bulletin # 439
Date: 820601
Parts and Labor Information
PARTS REQUIREMENTS
An initial supply of parts will be one time direct shipped to you for arrival at your dealership in June, 1982. Do not order recall parts from Newark
Export Supply. Order all requirements directly from Wixom using the mailing address contained in this letter. For more urgent handling, use Wixom
Telex No. 0235746, ITT Telex No. 4320031 FORD-WX or cable address "RECALLS - FORDOD, WIXOM, MICHIGAN". Our telephone number in
Wixom, Michigan, is area code (313) 349-2400, extension 2855. Please give the part number, description, quantity and recall number when ordering.
Use only the blower motor resistor assembly listed in the accompanying illustration for replacement on vehicles involved in this recall.
SERVICE STOCK
You are requested to purge and tag all service stock with Part Number E1FZ-19A706-A using defective parts tag Form 800-103. The Form should be
labeled "Recall 439 - Hold for Disposition Instructions". Notify your supervising Ford location of the quantities involved and request disposition
instructions.
LABOR ALLOWANCES
Replace A/C blower motor
resistor assembly
0.3 Hr. Insert in Box "B" of Form 1864
Administrative Allowance
0.1 Hr.
The 0.1 hour administrative allowance must be added to the replacement time before inserting the total time in Box "B".
Please note that there should not be any inspections in this recall. All units are to have the blower motor resistor assembly replaced, and all claims are to
have the labor time shown in Box "B".
Note:
Return company claim copy No. 2 for reimbursement.
REPORTING/REIMBURSEMENT OF COMPLETIONS
Upon completion of the required service, return the second copy of the Form 1864 completely filled out and signed by authorized dealer personnel. Only
the Form 1864 will be accepted for reimbursement on this program. It is important that all claims be filed for all completed units so that our records will
show completion. Any problem encountered with this recall should be discussed with your Ford supervising location or this office.
Technical Instructions
Technical Instructions
Removal:
1.
Remove the glove compartment liner by pressing in on each end of the liner and allowing the glove compartment door to hang by its hinges.
2.
Disconnect the wire connector from the blower motor resistor assembly.
