LN7 L4-098 1.6L VIN 4 2-bbl (1982)
EXHIBIT I - EMISSIONS RECALL 86E51
Vehicles With Kit Codes A and B (Calibration Code 1-03S-R00, Engines Codes 2F/2J-685-AA)
1.
Refer to Exhibit I. Remove the existing black/gray air control valve (ACV) vacuum delay valve (VDV) and replace it with a black/brown vacuum
delay valve (part number D3DZ-12A091-B). Install the vacuum delay valve with the black side of the valve toward the vacuum source.
2.
Remove the distributor vacuum hose at the distributor and install a black/brown vacuum delay valve (VDV) (part number D3DZ-12A091-B) with
a 3-inch long piece of 5/32-inch vacuum hose (part number D0PZ-12226-B). Install the valve and the 3-inch piece of vacuum hose such that the
black side of the valve is inserted into the vacuum hose removed from the distributor. Install the open end of the 3-inch hose onto the distributor.
3.
Refer to Exhibit IV (Page 12). Affix a new Vehicle Emission Control Information (VECI) decal over the existing decal. Verify that the vehicle
identification number (VIN) printed on the decal matches that of the vehicle.
