Recall - Emission Control System Modification - Page 543
Install the valve and the 3-inch piece of hose such that the black side of the valve is facing the vacuum source.
7.
Refer to Exhibit IV (Page 12). Affix a new Vehicle Emission Control Information (VECI) decal over the existing decal. Verify that the vehicle
identification number (VIN) of the decal matches that of the vehicle.
Exhibit V - Emissions Recall 86E51
8.
Refer to Exhibit V. Prepare an Authorized Modifications decal (Form FPS-8262) as shown. Affix the decal to a flat clean surface on the radiator
support.
Vehicles With Kit Codes M, N and O (Calibration Codes 2-04Q-R00/R10/R13, Engine Codes UF-660/662-AA/BA/BB/BC, UJ-660-AA/AB/AC and
UJ-662-AA
