LN7 L4-098 1.6L VIN 4 2-bbl (1982)
5.
Refer to Exhibit II. Locate the combination air bypass and air control valve (ACV).
6.
Remove both large diameter outlet hoses on the combination air bypass and air control valve, reverse the hose locations and reinstall the hoses. It
may be necessary to loosen the hose at the exhaust manifold check valve so that the hose can be rotated to prevent air flow restriction.
7.
Refer to Exhibit II. Remove the air control valve (ACV) vacuum hose of the combination air bypass and air control valve and install a black/brown
vacuum delay valve (VDV) (part number D3DZ-12A091-B) with a 3-inch long piece of 5/32-inch vacuum hose (part number D0PZ-12226-B).
Install the valve and the 3-inch piece of hose such that the black side of the valve is facing the vacuum source.
8.
Refer to Exhibit IV (Page 12). Affix a new Vehicle Emission Control Information (VECI) decal over the existing decal. Verify that the vehicle
identification number (VIN) printed on the decal matches that of the vehicle.
Exhibit V - Emissions Recall 86E51
9.
Refer to Exhibit V. Prepare an Authorized Modifications decal (Form FPS-8262) as shown. Affix the decal to a flat clean surface on the radiator
support.
Vehicles With Kit Codes K and L (Calibration Code 1-04S-R10, Engine Codes UF-686/688-AB/BB/CB, UJ-686-AB/BB/CB)
