Recall - Emission Control System Modification for Vacuum Delay Valve
any other reason.
TECHNICAL INSTRUCTIONS (See Attachment I) (Page 4)
Special Instructions for Vehicle Emission Control Information (VECI) Decals
Most of the vehicles serviced under this recall will require a new Vehicle Emission Control Information (VECI) decal. Decals will be mailed directly to
the owners of the affected vehicles. Each decal will have the vehicle identification number (VIN) of the vehicle printed on it.
In the event that an owner returns a vehicle without a decal refer to the enclosed vehicle listing or Exhibit IV to determine the correct decal. Contact your
FPSD District Office and provide the decal part number and the VIN.
PARTS REQUIREMENTS
Service parts required for this recall may be ordered through normal order processing channels.
Service Part
Number
Description
Class
Dealer Price
D3DZ-12A091-B
Valve, Vacuum
AG
$4.99
Delay
D0PZ-12226-B
Hose, Vacuum
AG
$0.08/vehicle
5/32-Inch
(3 inches required) a/
$0.14/vehicle (5 inches required) a/
383003-S
Connector, Vacuum
AG
$1.45 (Pkg. of 5)
Service Part
Number
Description
Class
Dealer Price
373846-S
Tee, Vacuum
BR
$1.16
382444-S
Cap, Vacuum
BS
$1.90 (Pkg. of 10)
Form FPS-8262
Decal, Authorized
-
No Charge. Available
Modifications
on the Weekly stock
Order Pad (Pkg. of 25, with clear overlay).
a/ Based on $16.32 per 50 foot roll
LABOR
Base Labor Time
Modify Emission Control System . . . . . . . . . . . . . . . 0.4 Hr. Insert in Box "B" of Form 1864
Supplemental Labor Time (Additive to Above)
Adjust Ignition Timing (Vehicles with Kit Codes C, D, F, G, I and J). . . . 0.2 Hr.
Administrative Allowance . . . . . . 0.1 Hr.
The 0.1 hour administrative allowance must be added before inserting the total labor time in Box "B" of the Form 1864.
REPORTING OF COMPLETIONS
Only the Form 1864 will be accepted for reimbursement under this program. Upon completion of the required service, the Form 1864 must be
completely filled out and signed by authorized dealer personnel. The Forms 1864 must be entered through the Direct Warranty Entry (DWE) system.
Dealerships without DWE capability must submit copy number 2 of the Forms 1864 by mail. Should your dealership receive preprinted Forms 1864 with
seven digit claim numbers, you must drop the first digit and enter only the last six digits. You must sight verify the claim number for accuracy.
It is important that all claims be filed for all completed units so that you will be reimbursed and our records will show completion. Any problems
encountered with this recall should be discussed with your FPSD Service Zone Manager.
Technical Instructions For Emissions Recall 86E51 (Attachment I)
