LN7 L4-098 1.6L VIN 4 2-bbl (1982)
16.
With someone holding the distributor steady on the support tool or vise, drive the pin into the shaft until the end of the pin is flush with the step in
the drive coupling.
17.
Check for free movement of the drive coupling on the pin and that the pin does not extend beyond the step in the coupling in either direction.
18.
Remove the distributor from the fixture and check for free rotation.
19.
Install the drive coupling spring in the groove on the drive coupling.
20.
Install the distributor assembly in the engine.
21.
Install distributor cap and rotor.
