mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Recall - Emission Control System Modification|Page 1722 > < Recall - Emission Control System Modification|Page 1720
Page 7
background image

Install the valve and the 3-inch piece of hose such that the black side of the valve is facing the vacuum source.

8.

Refer to Exhibit IV (Page 12). Affix a new Vehicle Emission Control Information (VECI) decal over the existing decal. Verify that the vehicle
identification number (VIN) printed on the decal matches that of the vehicle.

Exhibit V - Emissions Recall 86E51

9.

Refer to Exhibit V. Prepare an Authorized Modifications decal (Form FPS-8262) as shown. Affix the decal to a flat clean surface on the radiator
support.

Recall - Emission Control System Modification|Page 1722 > < Recall - Emission Control System Modification|Page 1720