mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Customer Interest for Washer Fluid Level Switch: > < Wiper Control Module|Locations
Page 1
background image

Washer Fluid Level Switch: All Technical Service Bulletins
Wiper/Washer - Low Fluid Warning Light Stays On

Article No. 84-21-9

WIPER/WASHER - LOW FLUID WARNING LIGHT STAYS ON

FORD ALL MODEL YEARS AND ALL CAR LINES WITH LOW FLUID WARNING LIGHT

LINCOLN-MERCURY ALL MODEL YEARS AND ALL CAR LINES WITH LOW FLUID WARNING LIGHT

LIGHT TRUCKS ALL MODEL YEARS AND ALL LINES WITH LOW FLUID WARNING LIGHT

On some vehicles equipped with low fluid warning light, the light may stay on even when the washer reservoir is full. This is caused by using washer
fluid concentrate (C9AZ-19550-A/B) that has not been mixed with water according to the instructions. The undiluted washer solution is absorbed by the
float resulting in the float sinking.

When filling the washer reservoir with washer fluid concentrate (C9AZ-19550-A/B), the instructions on the can must be followed. Mixing the
concentrated washer fluid with water will stop the float from sinking.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

Customer Interest for Washer Fluid Level Switch: > < Wiper Control Module|Locations