LN7 L4-98 1.6L SOHC VIN 4 2-bbl HP (1983)
wheel cylinder to ensure the deeper of the two slots in the adjuster socket fits in the parking brake lever.
8.
Install adjuster lever in the parking brake lever groove and into the adjuster socket slot.
9.
Using suitable brake spring pliers, install adjusting screw retracting spring from leading shoe slot to adjuster lever notch.
10.
Install brake drum. Refer to individual car chapters for wheel bearing adjustment procedure.
11.
Install tire and wheel assembly.
12.
If any hydraulic connections have been opened, perform system brake bleeding procedures.
13.
Adjust parking brake. Refer to individual car chapters for procedure.
14.
Inspect all hydraulic lines and connection for leakage, and repair as necessary.
15.
Check master cylinder fluid level and replenish as necessary.
16.
Check brake pedal for proper feel and return.
17.
Lower vehicle and road test. Do not severely apply brakes immediately after installation of new brake linings or permanent damage may
occur to linings, and/or brake drums may become scored. Brakes must be used moderately during first several hundred miles of operation
to ensure proper burnishing of linings.
