Lynx L4-116 1.9L VIN J FI HP (1986)
BEFORE STARTING, SLIDE THE DRIVER'S SEAT TO THE FULL REARWARD POSITION FOR CLEARANCE AROUND THE FRONT
ATTACHMENT.
1. REMOVE THE INSULATOR FROM THE DRIVER'S SIDE OUTBOARD SEAT TRACK. IF EQUIPPED WITH A PLASTIC FRONT SIGHT
SHIELD, REMOVE THE FRONT RETAINING SCREW AND POSITION THE SIGHT SHIELD OUT OF THE WAY.
2. INSPECT THE FRONT OUTER LOWER SUPPORT (LEG) IN AREA SHOWN ON ATTACHMENT IV. IF THE SUPPORT IS CRACKED
LESS THAN 100% OR IS NOT CRACKED AT ALL, INSTALL THE REINFORCING BRACKET (FOLLOW STEPS 3 THROUGH 12).
IF THE SUPPORT IS COMPLETELY CRACKED THROUGH OR HAS BEEN REPAIRED (WELDED, BRACKETED, ETC.) REPLACE
THE OUTBOARD SEAT TRACK (REFER TO THE APPROPRIATE SHOP MANUAL FOR THE REPLACEMENT PROCEDURES). IF THE
